PA222 Search Results

Contextual Info: 95005 PA2222 PA2222T LoPro Dual SPDT Analog Switch A N AL O G PROD U CTS D I VI S I ON Features • CMOS Technology for Bus and Analog Applications  Low On-Resistance: 0.6Ω.   Vcc Range: 1.8V to 4.2V Rail-to-Rail Signal Range  High Off Isolation: -75dB @ 100kHz

Contextual Info: 95005 PA2222 PA2222T LoPro Dual SPDT Analog Switch ANALOG PRODUCTS DIVISION Features • CMOS Technology for Bus and Analog Applications  Low On-Resistance: 0.6Ω.   Vcc Range: 1.8V to 4.2V Rail-to-Rail Signal Range  High Off Isolation: -75dB @ 100kHz

Contextual Info: PA2223 LoPro Dual SPDT Analog Switch 95252 Features • CMOS Technology for Bus and Analog Applications  Low On-Resistance: 0.6Ω.   Vcc Range: 1.8V to 4.2V Rail-to-Rail Signal Range  High Off Isolation: -75dB @ 100kHz  Crosstalk Rejection: -90dB @ 100kHz

Contextual Info: PA22206A01 Rev: 01 10-2006 K4MTG GS4MT GRIPPER REPLACEMENT KIT INSTALLATION INSTRUCTIONS Panduit Corp. 2006 ENGLISH GRIPPER ASSEMBLY REMOVAL 1. Lay tool down on a hard flat surface so that the tension indicator is facing upward. 2. Using supplied punch 3 and a hammer, drive out two existing roll pins (1) from existing gripper

Contextual Info: PA22204A01 REV: 04 8-2004 KT2MG BT2MS75 AND ST2MT GRIPPER REPLACEMENT KIT INSTALLATION INSTRUCTIONS Panduit Corp. 2004 The KT2MG Gripper Replacement Kit replaces the current gripper in the event of reduced performance or excessive wear caused by extended usage. Follow the step-by-step instructions below:

AN 9525.2

Abstract: PA2223
Contextual Info: 95252 ANALOG PRODUCTS DIVISION PA2223 LoPro Dual SPDT Analog Switch Features • CMOS Technology for Bus and Analog Applications Description  Low On-Resistance: 0.6Ω.   Vcc Range: 1.8V to 4.2V Rail-to-Rail Signal Range  High Off Isolation: -75dB @ 100kHz

Contextual Info: PA22205A01 Rev: 04 7-2013 K4M-BLD GS4MT BLADE REPLACEMENT KIT INSTALLATION INSTRUCTIONS DEUTSCH ENGLISH Panduit Corp. 2013 BLADE REPLACEMENT 1. Hold tool with nose pointing upward and remove two existing screws 2 . Loosen screw (A). Lift out cutter cap (B) at bottom and retain. Remove existing blade (1) and discard.

Contextual Info: B U R R -B R O W N INA133 INA2133 For most current data sheet and other product information, visit www.burr-brown.com High-Speed, Precision DIFFERENCE AMPLIFIERS FEATURES APPLICATIONS • DESIGNED FOR LOW COST • DIFFERENTIAL INPUT AMPLIFIER BUILDING BLOCK

Contextual Info: B U R R -B R O W N INA143 INA2143 For most current data sheet and other product information, visit www.burr-brown.com High-Speed, Precision, G = 10 or G = 0.1 DIFFERENCE AMPLIFIERS FEATURES APPLICATIONS • DESIGNED FOR LOW COST • G = 10V/V or G = 0.1 V/V

hi-pot transformer

Abstract: HI-POT HI-POT transformers 9 pin pulse transformer
Contextual Info: High Frequency Wire Wound Transformers EP13 Platforms - SMT Power Range: up to 60W Height: 12.7mm Max Footprint: 17.7mm x 14.0mm Max Toplogy: Forward and Flyback Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C 126.7µH ±10% Lk. Inductance

PA2369NL

Abstract: PA2466 PA2369 PA2437 hi-pot transformer PA2431NL 480UH
Contextual Info: High Frequency Wire Wound Transformers EP13 Platforms - SMT Power Range: Up to 60W Height: 12.7mm Max Footprint: 17.7mm x 14.0mm Max Topology: Forward and Flyback Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C 5 3-4 (3-4) with (10,9,8,7) shorted

marking PA50

Abstract: D2PB02 7809 MARKING
Contextual Info: NJU6854 132COMMON x 132RGB LCD DRIVER FOR 65,536-COLOR STN DISPLAY ! GENERAL DESCRIPTION The NJU6854 is a 132COMMON x 132RGB LCD driver for 65,536-color STN display. It contains common drivers, RGB drivers, a serial and a parallel MPU interface circuit, an internal LCD power supply,

PA234

Abstract: pc181 pin configuration PA263 PC92 PB233 rs 24v COMB31 SSC32 pc174 PC310
Contextual Info: NJU6854 132COMMON x 132RGB LCD DRIVER FOR 65,536-COLOR STN DISPLAY GENERAL DESCRIPTION The NJU6854 is a 132COMMON x 132RGB LCD driver for 65,536-color STN display. It contains common drivers, RGB drivers, a serial and a parallel MPU interface circuit, an internal LCD power supply,

700-PK400A1

Abstract: 700-PK400-A1 199-FSMA11 NEMA P600 199-FSMA10 4 pole relay
Contextual Info: Bulletin 700 Control Relays Type P, PK, and PH Bulletin 700 S S S S Cat. No. 700-P400A1 Cat. No. 700DC-P200 S Cat. No. 700-PK400A1 Cat. No. 700-PH200 S Direct Drive Convertible Contact Cartridge Relays Type P, PK, and PH 600V Maximum AC/DC Overlapping Contact

Contextual Info: PA SERIES The PA series fixed, chip inductor provides a cubed shape which is easily handied by automatic equipment for assembly into thick or thin film circuitry. Other unique features are also offered by this series. An edge plating is provided for forming a solder fillet. The

2227U

Abstract: 22-27P 990JA 227U 227PA A2227P
Contextual Info: B U R R -B R O W N OPA227 PA2227 OPA4227 High Precision, Low Noise OPERATIONAL AMPLIFIERS FEATURES DESCRIPTION • • • • • • • • The OPA227 series op amps combine low noise and wide bandwidth with high precision to make them the ideal choice for applications requiring excellent ac and

hipot pulse

Contextual Info: High Frequency Wire Wound Transformers EFD25 Platforms - SMT Power Range: Up to 105W Height: 13.7mm Max Footprint: 32.0mm x 26.4mm Max Topology: Forward and Flyback Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C 5 21.4µH ±40%

Contextual Info: PA SERIES The PA series fixed, chip inductor provides a cubed shape which is easily handied by automatic equipment for assembly into thick or thin film circuitry. Other unique features are also offered by this series. An edge plating is provided for forming a solder fillet. The

Contextual Info: HIGH FREQUENCY WIRE WOUND TRANSFORMERS EFD25 Platforms - SMT Power Range: Up to 105W Height: 13.7mm Max Footprint: 32.0mm x 26.4mm Max Topology: Forward and Flyback Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C 5 DCR Hi-Pot K1 Factor

Contextual Info: HIGH FREQUENCY WIRE WOUND TRANSFORMERS EP13 Platforms - SMT Power Range: Up to 60W Height: 12.7mm Max Footprint: 17.7mm x 14.0mm Max Topology: Forward and Flyback Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C 5 DCR Hi-Pot K1 Factor

Contextual Info: OPA227 PA2227 OPA4227 B U R R -B R O W N High Precision, Low Noise OPERATIONAL AMPLIFIERS FEATURES DESCRIPTION • • • • • • • • The OPA227 series op amps combine low noise and wide bandwidth with high precision to make them the ideal choice for applications requiring excellent ac and

Contextual Info: Piconics, Inc. PA Series Piconics PA series fixed, chip inductor provides a cubed shape which, is easily handled by automatic equipment for assembly into thick or thin film circuitry. Other unique features are also offered by this series. An Edge plating is provided for forming a

12v transformer

Abstract: hi-pot transformer
Contextual Info: High Frequency Wire Wound Transformers EP13 Platforms - SMT Power Range: up to 60W Height: 12.7mm Max Footprint: 17.7mm x 14.0mm Max Toplogy: Forward and Flyback Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C 126.7µH ±10% Lk. Inductance

PA2467NL

Abstract: PA1269 PA2369NL PA2194NL PA1136 pa2467 PA2297NL PA2369 PA136 PA232
Contextual Info: High Frequency Wire Wound Transformers EP13 Platforms - SMT Power Range: Up to 60W Height: 12.7mm Max Footprint: 17.7mm x 14.0mm Max Topology: Forward and Flyback Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C 5 3-4 (3-4) with (10,9,8,7) shorted