The recommended land pattern for the 20VLS10-R is a rectangular pad with a minimum size of 2.5 mm x 1.5 mm, with a 0.5 mm radius corner and a 0.3 mm solder mask clearance.
The 20VLS10-R is rated for operation up to 150°C, but it's recommended to derate the voltage and current ratings above 125°C to ensure reliable operation. Consult the datasheet for specific derating guidelines.
Use a soldering iron with a temperature of 250°C to 270°C, and a solder with a melting point of 180°C to 220°C. Avoid using excessive force or bending the leads during rework, as this can cause damage to the internal components.
Yes, the 20VLS10-R is compatible with lead-free soldering processes, but it's recommended to follow the manufacturer's guidelines for lead-free soldering to ensure reliable joints.
The typical ESR of the 20VLS10-R is around 10 mohm to 20 mohm, depending on the frequency and operating conditions. Consult the datasheet for specific ESR values at different frequencies.
