74AVC16244DGG,118 datasheet by NXP Semiconductors

74AVC16244DGG,118 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the 74AVC16244DGG,118?
  The recommended operating voltage range for the 74AVC16244DGG,118 is 1.2V to 3.6V.
• How do I ensure signal integrity when using the 74AVC16244DGG,118 in a high-speed application?
  To ensure signal integrity, use a low-impedance PCB design, keep signal traces short, and use termination resistors as needed. Also, consider using a signal integrity analysis tool to simulate and optimize your design.
• Can I use the 74AVC16244DGG,118 in a 5V system?
  While the 74AVC16244DGG,118 is designed for low-voltage operation, it can tolerate 5V inputs, but only if the output is not connected to a 5V device. If you need to interface with 5V devices, consider using a level translator or voltage regulator.
• How do I handle power sequencing when using multiple 74AVC16244DGG,118 devices in a system?
  To avoid latch-up or other issues, ensure that the power supply voltage is applied to all devices in a specific sequence, typically from lowest voltage to highest voltage. Consult the datasheet and application notes for specific guidance.
• What is the maximum clock frequency supported by the 74AVC16244DGG,118?
  The maximum clock frequency supported by the 74AVC16244DGG,118 is 250 MHz, but this may vary depending on the specific application and operating conditions. Consult the datasheet and application notes for specific guidance.