74HC2G32DP,125 datasheet by NXP Semiconductors

74HC2G32DP,125 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the 74HC2G32DP,125?
  The recommended operating voltage range for the 74HC2G32DP,125 is 2.0 V to 7.0 V, with a typical voltage of 5.0 V.
• How do I handle the power-up and power-down sequencing for the 74HC2G32DP,125?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
• What is the maximum frequency of operation for the 74HC2G32DP,125?
  The maximum frequency of operation for the 74HC2G32DP,125 is 100 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the 74HC2G32DP,125 is properly terminated?
  The 74HC2G32DP,125 requires proper termination to prevent signal reflections and ensure signal integrity. This can be achieved by using a termination resistor (e.g. 50 ohms) at the output of the device, and/or using a transmission line with a characteristic impedance of 50 ohms.
• What is the maximum output current that the 74HC2G32DP,125 can sink or source?
  The maximum output current that the 74HC2G32DP,125 can sink or source is 25 mA per output pin, with a total current limit of 100 mA for all output pins combined.