The maximum frequency of operation for the 74HC373D is typically around 30-40 MHz, but this can vary depending on the specific application and operating conditions.
To ensure that the outputs are not corrupted during power-up or power-down, it is recommended to use an external pull-up or pull-down resistor on the OE (Output Enable) pin to keep the outputs in a defined state.
Yes, the 74HC373D can be used as a level shifter, but it is not recommended as it is not designed for this purpose. The device is intended for use as an octal transparent latch, and using it as a level shifter may compromise its performance and reliability.
The maximum current that can be sourced or sunk by the outputs of the 74HC373D is typically around 25 mA, but this can vary depending on the specific application and operating conditions.
To handle bus contention when using multiple 74HC373D devices, it is recommended to use an external bus arbiter or multiplexer to ensure that only one device is driving the bus at a time.
