74HC4024DB,112 datasheet by NXP Semiconductors

74HC4024DB,112 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the 74HC4024DB,112?
  The recommended operating voltage range for the 74HC4024DB,112 is 2.0 V to 7.0 V, with a typical voltage of 5.0 V.
• How do I handle the power-up and power-down sequences for the 74HC4024DB,112?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
• What is the maximum clock frequency that the 74HC4024DB,112 can handle?
  The maximum clock frequency that the 74HC4024DB,112 can handle is 25 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the 74HC4024DB,112 is properly terminated to prevent signal reflections?
  It is recommended to use a termination resistor of 33 ohms to 50 ohms at the output of the device to prevent signal reflections and ensure proper signal integrity.
• Can I use the 74HC4024DB,112 in a 3.3V system?
  Yes, the 74HC4024DB,112 can be used in a 3.3V system, but the input and output voltage levels should be adjusted accordingly to ensure proper operation.