74HC4024DB,118 datasheet by NXP Semiconductors

74HC4024DB,118 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the 74HC4024DB,118?
  The recommended operating voltage range for the 74HC4024DB,118 is 2V to 7V, with a typical voltage of 5V.
• How do I handle the power-up and power-down sequences for the 74HC4024DB,118?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
• What is the maximum clock frequency that the 74HC4024DB,118 can handle?
  The maximum clock frequency that the 74HC4024DB,118 can handle is 25 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the 74HC4024DB,118 is properly terminated?
  The 74HC4024DB,118 requires proper termination to prevent signal reflections and ensure reliable operation. This can be achieved by using a pull-up or pull-down resistor, or by using a termination network such as a series resistor and capacitor.
• What is the maximum output current that the 74HC4024DB,118 can sink or source?
  The maximum output current that the 74HC4024DB,118 can sink or source is 25 mA, but this can vary depending on the specific application and operating conditions.