Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img 74HCT14DB,118 datasheet by NXP Semiconductors

    • Hex inverting Schmitt trigger - Description: Hex Inverter Schmitt-Trigger; TTL Enabled ; Logic switching levels: TTL ; Number of pins: 14 ; Output drive capability: +/- 4 mA ; Power dissipation considerations: Low Power ; Propagation delay: 17 ns; Voltage: 4.5-5.5V; Package: SOT337-1 (SSOP14); Container: Reel Pack, SMD, 13"
    • Original
    • Yes
    • Transferred
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    74HCT14DB,118 datasheet preview

    74HCT14DB,118 Frequently Asked Questions (FAQs)

    • The recommended operating voltage range for the 74HCT14DB,118 is 4.5V to 5.5V, with a typical voltage of 5V.
    • To ensure reliable operation in high-temperature environments, it is recommended to derate the device's power consumption and ensure good thermal management, such as using a heat sink or providing adequate airflow.
    • While the 74HCT14DB,118 is specified for 5V operation, it can be used in a 3.3V system with some limitations. However, the output voltage levels may not meet the required specifications, and the device's noise immunity may be reduced.
    • To prevent electrostatic discharge (ESD) damage, it is recommended to handle the 74HCT14DB,118 with ESD-protective equipment, such as wrist straps or mats, and to follow proper ESD handling procedures.
    • The maximum frequency of operation for the 74HCT14DB,118 is typically around 30 MHz, but this can vary depending on the specific application and operating conditions.
    Supplyframe Tracking Pixel