74HCT2G08DP-Q100H datasheet by NXP Semiconductors

74HCT2G08DP-Q100H Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the 74HCT2G08DP-Q100H?
  The recommended operating voltage range for the 74HCT2G08DP-Q100H is 4.5V to 5.5V, with a typical voltage of 5V.
• How do I ensure the 74HCT2G08DP-Q100H is properly powered and decoupled?
  To ensure proper power and decoupling, connect the VCC pin to a stable 5V power supply, and add a 0.1uF ceramic capacitor between VCC and GND as close to the device as possible.
• What is the maximum frequency of operation for the 74HCT2G08DP-Q100H?
  The maximum frequency of operation for the 74HCT2G08DP-Q100H is 30MHz, but this can vary depending on the specific application and operating conditions.
• How do I handle the input and output pins during power-up and power-down?
  During power-up and power-down, ensure that all input pins are held at a valid logic level (either high or low) to prevent unwanted switching. Output pins should be isolated or terminated to prevent back-powering the device.
• What is the maximum current that can be sourced or sunk by the 74HCT2G08DP-Q100H?
  The maximum current that can be sourced or sunk by the 74HCT2G08DP-Q100H is 20mA per output pin, with a total device current limit of 100mA.