74LVC16244ADL,112 datasheet by NXP Semiconductors

74LVC16244ADL,112 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the 74LVC16244ADL,112?
  The recommended operating voltage range for the 74LVC16244ADL,112 is 1.65 V to 3.6 V.
• How do I ensure signal integrity when using the 74LVC16244ADL,112 in high-speed applications?
  To ensure signal integrity, use a low-impedance PCB design, keep signal traces short, and use termination resistors if necessary. Also, consider using a signal integrity analysis tool to simulate and optimize your design.
• Can I use the 74LVC16244ADL,112 in a 5V system?
  While the 74LVC16244ADL,112 is designed for low-voltage applications, it can tolerate 5V inputs, but the output voltage will be limited to the supply voltage (VCC). However, it's not recommended to use it in a 5V system without proper voltage translation or level shifting.
• How do I handle power sequencing when using the 74LVC16244ADL,112 in a system with multiple power domains?
  To avoid latch-up or other issues, ensure that the power supply to the 74LVC16244ADL,112 is turned on after the input signals are stable and within the recommended voltage range. You may need to add power sequencing circuits or use a power management IC to control the power-up sequence.
• What is the maximum clock frequency supported by the 74LVC16244ADL,112?
  The maximum clock frequency supported by the 74LVC16244ADL,112 is 100 MHz, but this may vary depending on the specific application, PCB design, and operating conditions.