74LVTH16244ADGGRG4 datasheet by Texas Instruments

74LVTH16244ADGGRG4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the 74LVTH16244ADGGRG4?
  The recommended operating voltage range for the 74LVTH16244ADGGRG4 is 2.3V to 3.6V.
• How do I ensure signal integrity when using the 74LVTH16244ADGGRG4 in a high-speed application?
  To ensure signal integrity, use a low-impedance PCB design, keep signal traces short, and use termination resistors as needed. Also, consider using a signal integrity analysis tool to simulate and optimize your design.
• Can I use the 74LVTH16244ADGGRG4 in a 5V system?
  While the 74LVTH16244ADGGRG4 is designed for low-voltage applications, it can tolerate 5V inputs, but the output voltage will be limited to the supply voltage (VCC). However, it's recommended to use a voltage regulator or level shifter to ensure reliable operation.
• How do I handle power sequencing when using the 74LVTH16244ADGGRG4 in a system with multiple power rails?
  To avoid latch-up or damage, ensure that the power rails are sequenced such that the VCC pin is powered up before the input signals, and powered down after the input signals. A power sequencing controller or a simple RC circuit can be used to achieve this.
• What is the maximum clock frequency supported by the 74LVTH16244ADGGRG4?
  The maximum clock frequency supported by the 74LVTH16244ADGGRG4 is 100 MHz, but this can vary depending on the specific application, PCB design, and operating conditions.