ACPL-K75T-060E Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance of the ACPL-K75T-060E?
  Broadcom recommends a PCB layout with a solid ground plane, short traces, and minimal vias to reduce noise and ensure signal integrity. A 4-layer PCB with a dedicated power plane and a separate ground plane is recommended.
• How do I ensure reliable operation of the ACPL-K75T-060E in high-temperature environments?
  To ensure reliable operation in high-temperature environments, it is recommended to follow proper thermal management practices, such as providing adequate heat sinking, using thermal interface materials, and keeping the device within its specified operating temperature range.
• What is the maximum allowable voltage on the VCC pin of the ACPL-K75T-060E?
  The maximum allowable voltage on the VCC pin of the ACPL-K75T-060E is 5.5V. Exceeding this voltage may damage the device.
• How do I troubleshoot issues with the ACPL-K75T-060E, such as output not switching or incorrect output voltage?
  To troubleshoot issues with the ACPL-K75T-060E, check the input voltage, input frequency, and output load. Verify that the device is properly powered and that the input signals are within the specified range. Use an oscilloscope to check the output waveform and voltage. Consult the datasheet and application notes for further guidance.
• Is the ACPL-K75T-060E compatible with lead-free soldering processes?
  Yes, the ACPL-K75T-060E is compatible with lead-free soldering processes. However, it is recommended to follow the recommended soldering profile and temperature guidelines to ensure reliable operation.