The maximum clock frequency for the ADC0804LCD is 640 kHz. However, it's recommended to operate at a clock frequency of 640 kHz or less to ensure accurate conversions.
The ADC0804LCD outputs data in a serial format, with the most significant bit (MSB) first. You'll need to use a microcontroller or other digital logic to latch and decode the output data.
The conversion time for the ADC0804LCD is approximately 100 μs. This is the time it takes for the ADC to complete a single conversion.
Yes, the ADC0804LCD can operate with a single supply voltage of 5V. However, the analog input voltage range is limited to 0-5V, and the output voltage swing is also limited to 0-5V.
You'll need to connect the clock input (CLKIN) to a clock signal from the microcontroller, and the data output (DOUT) to a digital input on the microcontroller. You may also need to use additional logic to handle the output data and control the conversion process.
