ADC10D020CIVS/NOPB datasheet by Texas Instruments

ADC10D020CIVS/NOPB Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that can be used with this ADC?
  The maximum clock frequency for the ADC10D020CIVS/NOPB is 20 MHz. However, it's recommended to use a clock frequency between 10 MHz to 15 MHz for optimal performance.
• How do I ensure accurate conversions with this ADC?
  To ensure accurate conversions, make sure to follow proper PCB layout guidelines, use a low-noise power supply, and ensure that the input signal is within the specified voltage range. Additionally, use a clock signal with low jitter and ensure that the ADC is properly terminated.
• Can I use this ADC in a multi-channel application?
  Yes, the ADC10D020CIVS/NOPB can be used in a multi-channel application. However, you'll need to use an external multiplexer to select the input channel and ensure that the multiplexer is properly synchronized with the ADC's conversion cycle.
• What is the latency of this ADC?
  The latency of the ADC10D020CIVS/NOPB is 2 clock cycles. This means that after the conversion is triggered, the ADC will output the converted data 2 clock cycles later.
• Can I use this ADC with a microcontroller that has a 3.3V supply?
  Yes, the ADC10D020CIVS/NOPB can be used with a microcontroller that has a 3.3V supply. The ADC's digital output is 3.3V-compatible, and it can be directly connected to a 3.3V microcontroller.