ADC14155W-MLS/NOPB datasheet by Texas Instruments

ADC14155W-MLS/NOPB Frequently Asked Questions (FAQs)

• What is the recommended layout and routing for the ADC14155W-MLS/NOPB to achieve optimal performance?
  Texas Instruments provides a layout and routing guide in the application note 'AN-1187: PCB Layout and Routing Guidelines for ADC14155' which provides detailed recommendations for optimal performance.
• How do I calibrate the ADC14155W-MLS/NOPB to achieve the best possible accuracy?
  The ADC14155W-MLS/NOPB has an internal calibration feature that can be enabled through the CAL pin. Additionally, Texas Instruments provides a calibration procedure in the datasheet and application notes that can be followed to achieve optimal accuracy.
• What is the maximum sampling rate that can be achieved with the ADC14155W-MLS/NOPB?
  The maximum sampling rate of the ADC14155W-MLS/NOPB is 1.4 MSPS, but this can be affected by the clock frequency, input signal frequency, and other factors. Refer to the datasheet and application notes for more information on achieving the maximum sampling rate.
• How do I interface the ADC14155W-MLS/NOPB with a microcontroller or FPGA?
  The ADC14155W-MLS/NOPB has a serial interface that can be connected to a microcontroller or FPGA using a SPI or I2C interface. Texas Instruments provides example code and interface diagrams in the datasheet and application notes to help with the interface design.
• What is the power consumption of the ADC14155W-MLS/NOPB, and how can I reduce it?
  The power consumption of the ADC14155W-MLS/NOPB is typically around 10 mW, but this can be reduced by using the power-down mode, reducing the clock frequency, and optimizing the interface and system design. Refer to the datasheet and application notes for more information on power consumption and reduction techniques.