ADS1013IRUGT datasheet by Texas Instruments

ADS1013IRUGT Frequently Asked Questions (FAQs)

• What is the maximum sampling rate of the ADS1013IRUGT?
  The maximum sampling rate of the ADS1013IRUGT is 3,000 samples per second (SPS) for the 12-bit mode and 1,500 SPS for the 14-bit mode.
• How do I configure the gain settings for the ADS1013IRUGT?
  The gain settings for the ADS1013IRUGT can be configured using the PGA (Programmable Gain Amplifier) bits in the configuration register. The gain can be set to 2/3, 1, 2, 4, 8, or 16.
• What is the input voltage range for the ADS1013IRUGT?
  The input voltage range for the ADS1013IRUGT is -2.5V to +2.5V, with an absolute maximum rating of -3V to +3.6V.
• How do I handle the noise and interference in the ADS1013IRUGT?
  To handle noise and interference in the ADS1013IRUGT, use a low-pass filter at the input, use a shielded cable, and keep the analog and digital grounds separate. Also, consider using a ferrite bead or a common-mode choke to filter out high-frequency noise.
• What is the power consumption of the ADS1013IRUGT?
  The power consumption of the ADS1013IRUGT is typically 1.2mA at 3.3V supply voltage, with a maximum current consumption of 2.5mA.