The recommended layout and routing for the ADS1606IPAPT involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the analog input traces. It's also recommended to use a 4-layer PCB with a dedicated analog power plane and a dedicated digital power plane.
To optimize the performance of the ADS1606IPAPT in noisy environments, use a low-pass filter at the input, use a shielded cable for the analog input, and consider using a common-mode filter or a differential amplifier to reject common-mode noise.
The maximum sampling rate of the ADS1606IPAPT is 250 kSPS, but this can be affected by the system clock frequency, the analog input frequency, and the digital output data format.
The ADS1606IPAPT has an internal calibration circuit that can be used to calibrate the device. The calibration process involves applying a known input voltage and adjusting the internal calibration registers to achieve optimal performance.
The power consumption of the ADS1606IPAPT depends on the operating mode, sampling rate, and supply voltage. In typical operating conditions, the power consumption is around 35 mW.
ADS1606IPAPT datasheet
by Texas Instruments
Findchips
