A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the input and output tracks should be kept short and away from noise sources.
The device requires a single 3.3V power supply, and the recommended biasing is VCC = 3.3V, VEE = 0V, and VREF = 1.65V. The input and output pins should be terminated with 50Ω resistors to ensure proper impedance matching.
The ALM-2712-TR1G is specified to operate up to 12.5 GHz, but the actual operating frequency may be limited by the specific application and PCB layout.
The device has a maximum junction temperature of 150°C. A thermal pad is provided on the bottom of the package, and a thermal interface material (TIM) should be used to improve heat transfer. A heat sink or thermal management system may be required for high-power applications.
The device should be stored in a dry, cool place, away from direct sunlight and moisture. It should be handled with anti-static precautions, such as using an anti-static wrist strap or mat, to prevent damage from electrostatic discharge.
ALM-2712-TR1G datasheet
by Avago Technologies
