The recommended crystal oscillator frequency for the AM1806BZWT3 is 24 MHz or 26 MHz, depending on the specific application and clock speed requirements.
To configure the AM1806BZWT3 for low-power mode, you need to set the appropriate bits in the Power Management Control Register (PMCCTL) and the Power Management Status Register (PMCSTS). You can also use the IDLE mode or STANDBY mode to reduce power consumption.
The maximum operating temperature range for the AM1806BZWT3 is -40°C to 85°C (industrial temperature range) or -40°C to 105°C (extended temperature range) depending on the specific package and application.
To implement a watchdog timer on the AM1806BZWT3, you need to configure the Watchdog Timer Control Register (WDTCTL) and set the watchdog timer interval using the Watchdog Timer Interval Register (WDTIV). You can also use the Watchdog Timer Reset Register (WDTRESET) to reset the watchdog timer.
The maximum current consumption of the AM1806BZWT3 depends on the specific operating conditions, clock speed, and peripherals used. However, the typical current consumption is around 150 mA at 1.8V and 300 MHz clock speed.
AM1806BZWT3 datasheet
by Texas Instruments
