The recommended crystal oscillator frequency for the AM1806BZWT4 is 24 MHz or 26 MHz, as specified in the datasheet. However, it's essential to note that the device can also operate with other frequencies, but the recommended frequencies ensure optimal performance and clock accuracy.
To configure the AM1806BZWT4 for low-power mode, you need to set the appropriate bits in the Power Management Control Register (PMCCTL). You can also use the IDLE mode, STANDBY mode, or HALT mode to reduce power consumption. Refer to the datasheet for specific register settings and mode descriptions.
The maximum operating temperature range for the AM1806BZWT4 is -40°C to 85°C. However, it's essential to note that the device's performance and reliability may be affected at extreme temperatures. Ensure that your design takes into account the operating temperature range and provides adequate thermal management.
Yes, the AM1806BZWT4 has an external memory interface that allows you to connect external memory devices, such as flash memory or SRAM. You can use the External Memory Interface (EMIF) module to configure the interface and access external memory. Refer to the datasheet for specific pin connections and configuration details.
The AM1806BZWT4 has a built-in watchdog timer that can be configured to reset the device in case of a software fault or hang. To implement a watchdog timer, you need to set the Watchdog Timer Control Register (WDTCTL) and enable the watchdog timer. You can also configure the watchdog timer period and timeout values according to your application requirements.
AM1806BZWT4 datasheet
by Texas Instruments
