DC/DC Converter - Product Weight (grams): 1.5; Input voltage min (V): 4.5; Input voltage max (V): 5.5; Output voltage min: 5; Output voltage max: 5; Output voltage dual assymetric (y/n): Single; Output Power (W): 1; Max Output current (A): 0.067; Efficiency (%): 78; Package type: SMD; Mounting: PCB; W (in): 0.44; L (in): 0.5; H (in): 0.25; W (mm): 11.176; L (mm): 12.7; H (mm): 6.35; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1000; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; Application 5 (Industrial): 1; MTBF (h): 980000; Derating : 85; Voltage Accuracy (%): ±5; Line Regulation (% of Vin): ±1.2; Load Regulation %: ±1.2; Ripple & Noise (mV p-p): 75; Switching Frequency typ (KHz): 100; Short circuit protection: Momentary
Aimtec recommends a PCB layout with a large copper area for heat dissipation, and a minimum of 2 oz copper thickness. A thermal via array under the module can also improve heat dissipation.
Aimtec recommends using a soldering profile with a peak temperature of 240°C to 250°C, and a dwell time of 30-60 seconds. A soldering iron with a temperature-controlled tip is recommended.
Aimtec recommends keeping the input voltage deviation within ±10% of the nominal input voltage to ensure reliable operation and to prevent damage to the module.
The AM1L-0505S-NZTR is rated for operation in environments with a relative humidity of up to 80%. However, it's recommended to take precautions to prevent moisture ingress, such as conformal coating or potting, in high-humidity environments.
Aimtec recommends using a low-ESR ceramic capacitor with a value of 10-22 μF, and a voltage rating of at least 1.5 times the nominal input voltage.
AM1L-0505S-NZTR datasheet
by Aimtec
Findchips
