AM26LS32ACNSR datasheet by Texas Instruments

AM26LS32ACNSR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the AM26LS32ACNSR?
  The recommended operating voltage range for the AM26LS32ACNSR is 4.5V to 5.5V.
• How do I ensure reliable data transmission with the AM26LS32ACNSR?
  To ensure reliable data transmission, ensure that the transmitter and receiver are properly terminated, and the transmission line is properly matched to the driver output impedance. Also, ensure that the data rate is within the specified range of 0.01 Mbps to 10 Mbps.
• What is the maximum cable length supported by the AM26LS32ACNSR?
  The maximum cable length supported by the AM26LS32ACNSR depends on the data rate and cable characteristics. As a general guideline, the maximum cable length is approximately 1000 feet (305 meters) at a data rate of 9600 bps, and 100 feet (30 meters) at a data rate of 1 Mbps.
• How do I handle electromagnetic interference (EMI) with the AM26LS32ACNSR?
  To minimize EMI, use shielded cables, keep the transmitter and receiver close together, and use a common-mode choke or ferrite bead on the transmission line. Also, ensure that the system is designed to meet the relevant EMI standards and regulations.
• What is the power consumption of the AM26LS32ACNSR?
  The power consumption of the AM26LS32ACNSR depends on the operating frequency and output load. Typically, the quiescent current is around 10 mA, and the dynamic current is around 20 mA at a data rate of 1 Mbps.