DC/DC Converter - Product Weight (grams): 50; Input voltage min (V): 9; Input voltage max (V): 18; Output voltage min: 12; Output voltage max: 12; Output voltage dual assymetric (y/n): Single; Output Power (W): 30; Max Output current (A): 2.5; Efficiency (%): 86; Package type: 2x1.6; Mounting: PCB; W (in): 1.6; L (in): 2; H (in): 0.4; W (mm): 40.64; L (mm): 50.8; H (mm): 10.16; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1500; EMC compliance 1: EN 55022 Class A; Case material: Copper; Application 4 (building automation/IoT): 1; Application 5 (Industrial): 1; MTBF (h): 550000; Derating : 70; Voltage Accuracy (%): ±2; Line Regulation (% of Vin): ±0.5; Load Regulation %: ±0.5; Ripple & Noise (mV p-p): 120; Switching Frequency typ (KHz): 250; Short circuit protection: Continuous; On/Off Control: 1; Voltage adjustment: 1
Aimtec recommends using a 10uF to 22uF X7R or X5R ceramic capacitor with a voltage rating of 50V or higher, placed as close as possible to the input pins.
Aimtec suggests providing adequate airflow, using a thermal interface material (TIM) between the converter and the heatsink, and ensuring the heatsink is properly attached to the converter.
The maximum allowed output capacitance is 220uF. Exceeding this value may cause instability or oscillation in the converter.
Yes, but it's essential to follow Aimtec's guidelines for parallel and redundant configurations, including using identical modules, ensuring proper synchronization, and implementing adequate overcurrent protection.
Aimtec recommends checking the input voltage, output load, and PCB layout for any issues, and verifying that the converter is properly soldered and connected. If issues persist, contact Aimtec's technical support for further assistance.
AM30K-1212SIZ datasheet
by Aimtec
