A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the antenna should be placed at least 10mm away from other components.
Implementing error correction mechanisms such as CRC and checksum, using a robust modulation scheme like QPSK or 16-QAM, and incorporating a retry mechanism can help ensure reliable communication in noisy environments.
The maximum transmit power of the AMMC-5024-W10 is +20 dBm. The transmit power can be adjusted by modifying the PA_BIAS voltage and the TX_GAIN register settings.
Antenna diversity can be implemented by connecting two antennas to the device and using the built-in antenna diversity feature. The device can automatically switch between the two antennas based on the received signal strength.
The recommended crystal oscillator frequency for the AMMC-5024-W10 is 26 MHz or 40 MHz, depending on the specific application and frequency band requirements.
