The maximum operating junction temperature for the AOZ1310CI-1 is 150°C.
To ensure the stability of the output voltage, a minimum output capacitance of 10uF with an ESR of 1Ω or less is recommended. Additionally, the output voltage can be stabilized by adding a 10nF ceramic capacitor between the VOUT and GND pins.
The recommended input capacitor value for the AOZ1310CI-1 is 10uF to 22uF with a voltage rating of 10V or higher.
The power dissipation of the AOZ1310CI-1 can be calculated using the formula: Pd = (VIN x IIN) - (VOUT x IOUT), where Pd is the power dissipation, VIN is the input voltage, IIN is the input current, VOUT is the output voltage, and IOUT is the output current.
The EN (Enable) pin is used to enable or disable the AOZ1310CI-1. When the EN pin is pulled high, the device is enabled, and when it is pulled low, the device is disabled.
