A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the antenna should be placed at least 10mm away from other components.
Use a robust error correction mechanism, such as CRC and retransmission, and implement a retry mechanism to handle packet loss. Also, ensure that the transmission power is set correctly and the antenna is properly matched.
The maximum operating temperature range for the ASSR-1510-503E is -40°C to +85°C. However, it's recommended to operate the device within a temperature range of -20°C to +70°C for optimal performance.
To configure the ASSR-1510-503E for low power consumption, set the device to sleep mode when not in use, reduce the transmission power, and use a low-power oscillator. Additionally, consider using a power-saving mode, such as the 'doze' mode, to reduce power consumption.
A quarter-wavelength monopole antenna or a dipole antenna with a length of around 30mm is recommended. The antenna should be matched to the device's output impedance (50 ohms) and should be placed at least 10mm away from other components.
ASSR-1510-503E datasheet
by Avago Technologies
