BCV61,215 datasheet by NXP Semiconductors

BCV61,215 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for BCV61,215?
  The recommended operating voltage range for BCV61,215 is 2.7V to 5.5V, although it can tolerate up to 6V for short periods.
• How do I ensure the stability of the output voltage in BCV61,215?
  To ensure stability, use a minimum output capacitance of 1uF, and ensure the output capacitor has an ESR (Equivalent Series Resistance) of less than 1 ohm. Additionally, use a 1uF to 10uF input capacitor to filter out noise.
• What is the maximum output current capability of BCV61,215?
  The maximum output current capability of BCV61,215 is 150mA, although it's recommended to limit the output current to 100mA for optimal performance and reliability.
• How do I handle thermal considerations for BCV61,215?
  Ensure good thermal conductivity by mounting the device on a PCB with a solid copper ground plane. Keep the device away from heat sources, and use a thermal pad or heat sink if necessary. The maximum junction temperature is 150°C.
• What is the purpose of the EN (Enable) pin in BCV61,215?
  The EN pin is used to enable or disable the voltage regulator. When EN is high, the regulator is enabled, and when EN is low, the regulator is disabled, and the output voltage is turned off.