The recommended operating voltage range for CC2430F32RTC is 2.0V to 3.6V. However, it can operate from 1.9V to 3.7V, but with reduced performance and reliability.
To configure the CC2430F32RTC for optimal power consumption, set the voltage regulator to the lowest possible voltage, use the lowest possible clock frequency, and enable power-saving modes such as sleep mode and idle mode. Additionally, disable unnecessary peripherals and use a low-power oscillator.
The maximum data transfer rate of the CC2430F32RTC's UART is 921.6 kbps. However, the actual data transfer rate may be limited by the baud rate generator and the clock frequency.
To implement a reliable reset mechanism for the CC2430F32RTC, use a combination of hardware and software reset mechanisms. Connect a reset button to the RESET_N pin, and use a software reset command to reset the device. Additionally, use a power-on reset circuit to ensure a clean power-up sequence.
The accuracy of the CC2430F32RTC's internal oscillator is ±10% over the operating temperature range of -40°C to 85°C. However, the accuracy can be improved by using an external crystal oscillator or by calibrating the internal oscillator using a reference clock.
CC2430F32RTC datasheet
by Texas Instruments
