CC2564NSRVMR datasheet by Texas Instruments

CC2564NSRVMR Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance of CC2564NSRVMR?
  Texas Instruments provides a recommended PCB layout guide in their application note AN042, which includes guidelines for component placement, routing, and grounding to ensure optimal performance and minimize electromagnetic interference (EMI).
• How do I configure the CC2564NSRVMR for Bluetooth Low Energy (BLE) mode?
  The CC2564NSRVMR can be configured for BLE mode by setting the MODE pin to a logic high level and using the HCI (Host Controller Interface) commands to configure the device for BLE operation. Refer to the CC2564NSRVMR user's guide for detailed instructions.
• What is the maximum transmit power of the CC2564NSRVMR?
  The maximum transmit power of the CC2564NSRVMR is +12 dBm, but it can be adjusted to a lower value using the TX_POWER_CTL register. The device also has a built-in power amplifier (PA) that can be used to boost the transmit power.
• How do I implement coexistence with other wireless technologies, such as Wi-Fi and LTE, when using the CC2564NSRVMR?
  Texas Instruments provides a coexistence guide (SWRA477) that provides guidelines and recommendations for implementing coexistence with other wireless technologies. The guide includes information on frequency planning, packet scheduling, and adaptive frequency hopping.
• What is the power consumption of the CC2564NSRVMR in different operating modes?
  The power consumption of the CC2564NSRVMR varies depending on the operating mode. In transmit mode, the power consumption is typically around 100 mA, while in receive mode it is around 50 mA. In sleep mode, the power consumption is typically around 1 μA. Refer to the datasheet for detailed power consumption specifications.