CD40110BEE4 datasheet by Texas Instruments

CD40110BEE4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for CD40110BEE4?
  The recommended operating voltage range for CD40110BEE4 is 3V to 18V, with a typical voltage of 5V or 15V for most applications.
• How do I handle the output enable (OE) pin in CD40110BEE4?
  The output enable (OE) pin is active-low, meaning it should be connected to GND to enable the outputs. When OE is high, the outputs are in a high-impedance state.
• What is the maximum clock frequency supported by CD40110BEE4?
  The maximum clock frequency supported by CD40110BEE4 is 10 MHz, but it can operate at frequencies up to 20 MHz with reduced voltage and load capacitance.
• How do I ensure proper power sequencing when using CD40110BEE4?
  To ensure proper power sequencing, apply power to the VCC pin before applying any input signals, and ensure that the power supply is stable before enabling the outputs.
• Can I use CD40110BEE4 in a 3.3V system?
  Yes, CD40110BEE4 can operate in a 3.3V system, but the output voltage levels may not be as high as those in a 5V system. Ensure that the output voltage levels meet the requirements of your system.