CD4029BM96 datasheet by Texas Instruments

CD4029BM96 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CD4029BM96?
  The recommended operating voltage range for the CD4029BM96 is 3V to 18V, with a typical voltage of 5V or 15V.
• How do I handle the output enable (OE) pin in my design?
  The output enable (OE) pin is active-low, meaning it should be connected to GND to enable the outputs. When OE is high, the outputs are in a high-impedance state.
• What is the maximum clock frequency supported by the CD4029BM96?
  The maximum clock frequency supported by the CD4029BM96 is 25 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure proper power sequencing when using the CD4029BM96?
  To ensure proper power sequencing, apply power to the VCC pin before applying any input signals. Also, ensure that the input signals are stable before enabling the outputs.
• What is the purpose of the VCC pin, and how should it be connected?
  The VCC pin is the power supply pin, and it should be connected to a stable voltage source. A decoupling capacitor (e.g., 0.1 μF) should be placed close to the VCC pin to filter out noise and ensure stable operation.