CD4040BM96E4 datasheet by Texas Instruments

CD4040BM96E4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CD4040BM96E4?
  The recommended operating voltage range for the CD4040BM96E4 is 3V to 18V, although it can operate up to 20V with reduced performance.
• How do I handle the high-frequency noise generated by the CD4040BM96E4?
  To handle high-frequency noise, use a decoupling capacitor (e.g., 0.1uF) between VCC and GND, and consider adding a series resistor (e.g., 10Ω) to the clock input to reduce ringing.
• What is the maximum clock frequency that the CD4040BM96E4 can handle?
  The maximum clock frequency that the CD4040BM96E4 can handle is approximately 10MHz, although this may vary depending on the specific application and operating conditions.
• How do I reset the CD4040BM96E4?
  The CD4040BM96E4 can be reset by applying a low signal (typically 0V) to the Reset (R) input. The Reset input must be held low for at least 10ns to ensure a proper reset.
• What is the propagation delay time for the CD4040BM96E4?
  The propagation delay time for the CD4040BM96E4 is typically around 10ns to 30ns, depending on the operating voltage and temperature.