CD4071BM96G4 datasheet by Texas Instruments

CD4071BM96G4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CD4071BM96G4?
  The recommended operating voltage range for the CD4071BM96G4 is 4.5V to 15.5V, although it can operate down to 3V with reduced performance.
• How do I ensure the CD4071BM96G4 is properly powered and decoupled?
  Use a 0.1uF ceramic capacitor between VCC and GND, and a 10uF electrolytic capacitor between VCC and GND, as close to the device as possible, to ensure proper power decoupling and noise reduction.
• What is the maximum frequency of operation for the CD4071BM96G4?
  The maximum frequency of operation for the CD4071BM96G4 is typically around 10MHz, although this can vary depending on the specific application and operating conditions.
• How do I handle the high-impedance state of the CD4071BM96G4 inputs when not in use?
  When not in use, it's recommended to tie the inputs to a valid logic level (VCC or GND) to prevent unwanted switching and reduce power consumption. Alternatively, use a pull-up or pull-down resistor to define the input state.
• What is the maximum output current of the CD4071BM96G4?
  The maximum output current of the CD4071BM96G4 is typically around 1mA per output, although this can vary depending on the specific application and operating conditions.