CD4072BM96 datasheet by Texas Instruments

CD4072BM96 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CD4072BM96?
  The recommended operating voltage range for the CD4072BM96 is 4.5V to 15.5V, with a typical operating voltage of 5V.
• How do I ensure the CD4072BM96 is properly powered and decoupled?
  To ensure proper operation, decouple the CD4072BM96 with a 0.1uF ceramic capacitor between VCC and GND, and a 10uF electrolytic capacitor between VCC and GND. Additionally, use a low-ESR capacitor for the power supply.
• What is the maximum frequency of operation for the CD4072BM96?
  The CD4072BM96 can operate up to 10MHz, but the maximum frequency of operation depends on the specific application and the quality of the PCB layout.
• How do I handle the thermal considerations for the CD4072BM96?
  The CD4072BM96 has a maximum junction temperature of 150°C. Ensure good thermal conductivity by using a heat sink or a thermally conductive PCB material, and avoid overheating the device.
• What is the input impedance of the CD4072BM96?
  The input impedance of the CD4072BM96 is typically around 1kΩ, but it can vary depending on the specific application and operating conditions.