CD74AC10M datasheet by Texas Instruments

CD74AC10M Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for CD74AC10M?
  The recommended operating voltage range for CD74AC10M is 2V to 6V, with a typical voltage of 5V.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (VCC or GND) to prevent them from floating and causing unwanted switching.
• What is the maximum frequency of operation for CD74AC10M?
  The maximum frequency of operation for CD74AC10M is typically around 100 MHz, but it can vary depending on the specific application and operating conditions.
• How do I ensure that the output signals are not distorted or attenuated?
  To ensure that the output signals are not distorted or attenuated, it is recommended to use a suitable load impedance and to keep the output traces as short as possible to minimize signal degradation.
• Can I use CD74AC10M in a 3.3V system?
  Yes, CD74AC10M can be used in a 3.3V system, but the output voltage levels may not be as high as those in a 5V system, and the noise margin may be reduced.