CD74AC273M datasheet by Texas Instruments

CD74AC273M Frequently Asked Questions (FAQs)

• What is the maximum frequency of operation for the CD74AC273M?
  The maximum frequency of operation for the CD74AC273M is typically 100 MHz, but it can vary depending on the specific application and operating conditions.
• How do I ensure that the CD74AC273M is properly powered?
  To ensure proper power supply, connect VCC to a 5V power source and GND to a common ground. Make sure to decouple the power supply with a 0.1uF capacitor to reduce noise and ensure stable operation.
• What is the maximum input voltage that the CD74AC273M can handle?
  The maximum input voltage that the CD74AC273M can handle is 5.5V. Exceeding this voltage may cause damage to the device.
• How do I handle the output enable (OE) pin?
  The output enable (OE) pin is active-low, meaning that the outputs are enabled when OE is low (connected to GND) and disabled when OE is high (connected to VCC).
• What is the propagation delay of the CD74AC273M?
  The propagation delay of the CD74AC273M is typically around 10-15 ns, but it can vary depending on the specific application and operating conditions.