CD74ACT153M96 datasheet by Texas Instruments

CD74ACT153M96 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CD74ACT153M96?
  The recommended operating voltage range for the CD74ACT153M96 is 4.5V to 5.5V, although it can operate as low as 3.5V with reduced performance.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent them from floating and causing unwanted switching.
• What is the maximum frequency of operation for the CD74ACT153M96?
  The maximum frequency of operation for the CD74ACT153M96 is typically around 100 MHz, although this can vary depending on the specific application and operating conditions.
• How do I ensure that the CD74ACT153M96 is properly powered?
  To ensure proper powering of the CD74ACT153M96, a decoupling capacitor (typically 0.1uF) should be placed as close as possible to the VCC pin, and the power supply should be able to provide sufficient current to drive the device.
• What is the maximum current that the CD74ACT153M96 can sink or source?
  The CD74ACT153M96 can sink or source up to 24mA of current per output pin, although this should be limited to 12mA per pin for reliable operation.