CD74ACT20M96 datasheet by Texas Instruments

CD74ACT20M96 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for CD74ACT20M96?
  The recommended operating voltage range for CD74ACT20M96 is 4.5V to 5.5V, although it can operate from 3.5V to 5.5V with reduced performance.
• How do I handle the unused inputs on the CD74ACT20M96?
  Unused inputs on the CD74ACT20M96 should be tied to VCC or GND through a 1kΩ to 10kΩ resistor to prevent floating inputs and reduce power consumption.
• What is the maximum frequency of operation for the CD74ACT20M96?
  The maximum frequency of operation for the CD74ACT20M96 is 100 MHz, although this can vary depending on the specific application and operating conditions.
• Can I use the CD74ACT20M96 in a 3.3V system?
  Yes, the CD74ACT20M96 can be used in a 3.3V system, but the output voltage will be reduced, and the device may not meet the specified propagation delay and transition times.
• How do I ensure signal integrity when using the CD74ACT20M96 in a high-speed application?
  To ensure signal integrity when using the CD74ACT20M96 in a high-speed application, use a low-impedance output driver, minimize trace lengths, and use proper termination and decoupling techniques.