CD74ACT280M96 datasheet by Texas Instruments

CD74ACT280M96 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CD74ACT280M96?
  The recommended operating voltage range for the CD74ACT280M96 is 4.5V to 5.5V, although it can operate from 2V to 6V with reduced performance.
• How do I handle the output enable (OE) pin in my design?
  The output enable (OE) pin should be connected to a logic signal that is low (0V) when the outputs are desired to be enabled, and high (VCC) when the outputs are desired to be disabled.
• What is the maximum frequency of operation for the CD74ACT280M96?
  The maximum frequency of operation for the CD74ACT280M96 is typically around 100 MHz, although this can vary depending on the specific application and operating conditions.
• How do I ensure proper termination of the outputs in my design?
  Proper termination of the outputs typically involves connecting a pull-up or pull-down resistor to the output pins, and ensuring that the output pins are not left floating.
• What is the power consumption of the CD74ACT280M96?
  The power consumption of the CD74ACT280M96 is typically around 20-30 mA, although this can vary depending on the specific application and operating conditions.