CD74HC00M96E4 datasheet by Texas Instruments

CD74HC00M96E4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CD74HC00M96E4?
  The recommended operating voltage range for the CD74HC00M96E4 is 2V to 6V, with a typical voltage of 5V.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent them from floating and causing unwanted behavior.
• What is the maximum frequency of operation for the CD74HC00M96E4?
  The maximum frequency of operation for the CD74HC00M96E4 is typically around 25 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the CD74HC00M96E4 is properly powered?
  To ensure proper power supply, connect the VCC pin to a stable power source, and the GND pin to a solid ground. Also, make sure to decouple the power supply with a capacitor (e.g., 0.1uF) to reduce noise and ensure stable operation.
• Can I use the CD74HC00M96E4 in a 3.3V system?
  Yes, the CD74HC00M96E4 can be used in a 3.3V system, but the output voltage will be limited to 3.3V. Also, the input voltage threshold may be affected, and the device may not operate at the same speed as it would at 5V.