The recommended operating temperature range for CY22395FXI is -40°C to +85°C, as specified in the datasheet. However, it's essential to note that the device can operate at temperatures beyond this range, but with reduced performance and reliability.
The clock output frequency on CY22395FXI can be configured using the Clock Control Register (CCR). You can set the clock frequency by programming the CCR register with the desired frequency value. Refer to the datasheet for the CCR register bit definitions and programming examples.
The maximum clock frequency supported by CY22395FXI is 200 MHz. However, the actual clock frequency may be limited by the specific application, PCB design, and signal integrity considerations.
To implement spread spectrum clocking (SSC) on CY22395FXI, you need to program the SSC Control Register (SSCCR) and configure the SSC frequency modulation parameters. Refer to the datasheet for the SSCCR register bit definitions and programming examples.
The power consumption of CY22395FXI varies depending on the operating mode. In typical operating conditions, the power consumption is around 150 mW. However, in low-power modes, such as standby or sleep mode, the power consumption can be as low as 10 mW. Refer to the datasheet for detailed power consumption specifications.
CY22395FXI datasheet
by Cypress Semiconductor
