The recommended crystal oscillator frequency for CY2292FXIT is 27 MHz. However, the device can operate with a frequency range of 20 MHz to 30 MHz.
To configure the CY2292FXIT for a specific output frequency, you need to set the appropriate values for the PLL (Phase-Locked Loop) registers. The datasheet provides a formula to calculate the PLL register values based on the desired output frequency.
The maximum output frequency that CY2292FXIT can generate is 133.33 MHz. However, the actual output frequency depends on the input clock frequency and the PLL settings.
Yes, CY2292FXIT can operate with input clock frequencies other than 27 MHz. However, the device's performance and output frequency may vary depending on the input clock frequency. It's recommended to consult the datasheet and perform thorough testing to ensure the device meets your specific requirements.
To ensure the CY2292FXIT is properly powered and bypassed, follow the recommended power supply and bypass capacitor configuration in the datasheet. Typically, a 3.3V power supply with a 0.1 μF bypass capacitor is recommended.
CY2292FXIT datasheet
by Cypress Semiconductor
