The maximum operating temperature range for CY7C0851AV-133AXC is 0°C to 70°C (commercial temperature range) and -40°C to 85°C (industrial temperature range).
The CY7C0851AV-133AXC requires a single 3.3V clock signal, which can be generated using an external clock source or a phase-locked loop (PLL) circuit. The clock signal should be connected to the CLK pin.
The maximum data transfer rate for the CY7C0851AV-133AXC is 133 MHz, which translates to a maximum data transfer rate of 266 MB/s.
The CY7C0851AV-133AXC can be configured for synchronous or asynchronous operation by setting the SYNC pin high or low, respectively. In synchronous mode, the device uses the clock signal to synchronize data transfers, while in asynchronous mode, the device uses the rising edge of the clock signal to latch data.
The power consumption of the CY7C0851AV-133AXC depends on the operating frequency and mode. At 133 MHz, the typical power consumption is around 450 mW. However, this value can vary depending on the specific application and operating conditions.
CY7C0851AV-133AXC datasheet
by Cypress Semiconductor
