The maximum operating temperature range for CY7C133-25JC is 0°C to 70°C (commercial temperature range) and -40°C to 85°C (industrial temperature range).
The CY7C133-25JC requires a clock signal to operate. You can use an external clock source or generate a clock signal using a crystal oscillator or a phase-locked loop (PLL) circuit. The clock signal should be connected to the CLK pin.
The maximum clock frequency supported by CY7C133-25JC is 25 MHz.
To configure the CY7C133-25JC for burst mode operation, you need to assert the BWS# pin low and provide a valid address on the address pins. The device will then perform a burst read or write operation based on the R/W# pin state.
The latency for a read operation in CY7C133-25JC is 2 clock cycles.
CY7C133-25JC datasheet
by Cypress Semiconductor
Findchips
Findchips