CY7C65630-56LFXA datasheet by Cypress Semiconductor

CY7C65630-56LFXA Frequently Asked Questions (FAQs)

• What is the maximum cable length supported by the CY7C65630-56LFXA?
  The maximum cable length supported by the CY7C65630-56LFXA is 3 meters (10 feet) for USB 2.0 and 1 meter (3.3 feet) for USB 3.2 Gen 1.
• How do I configure the CY7C65630-56LFXA for USB 3.2 Gen 2 operation?
  To configure the CY7C65630-56LFXA for USB 3.2 Gen 2 operation, you need to set the USB_SPEED_SEL pin to '1' and ensure that the device is powered by a 1.2V power supply. Additionally, you need to use a USB 3.2 Gen 2-compliant cable and ensure that the host controller supports USB 3.2 Gen 2.
• What is the power consumption of the CY7C65630-56LFXA in low-power mode?
  The power consumption of the CY7C65630-56LFXA in low-power mode is typically around 10mA. However, this can vary depending on the specific application and usage scenario.
• Can I use the CY7C65630-56LFXA with a USB-C connector?
  Yes, the CY7C65630-56LFXA can be used with a USB-C connector. However, you need to ensure that the USB-C connector is configured to support USB 3.2 Gen 1 or Gen 2 operation, and that the device is properly configured to support the desired USB speed.
• How do I implement overcurrent protection with the CY7C65630-56LFXA?
  To implement overcurrent protection with the CY7C65630-56LFXA, you need to use an external overcurrent protection device, such as a fuse or a current-limiting resistor, in series with the VBUS pin. You can also use the device's built-in overcurrent protection feature by setting the OCP_EN pin to '1'.