The recommended crystal oscillator frequency for the CY8C5248LTI-030 is 32.768 kHz. This frequency is used as the clock source for the internal real-time clock (RTC) and watchdog timer.
To configure the CY8C5248LTI-030 for low power consumption, you can use the device's power management features, such as the sleep mode, hibernate mode, and dynamic voltage frequency scaling (DVFS). You can also use the device's low-power modes, such as the 'sleep' and 'hibernate' modes, to reduce power consumption when the device is not in use.
The maximum operating temperature range for the CY8C5248LTI-030 is -40°C to +85°C. However, the device can be operated at temperatures up to +105°C for short periods of time, but this may affect its reliability and lifespan.
Yes, the CY8C5248LTI-030 can be used with an external memory. The device has a 16-bit external memory interface that can be used to connect to external memory devices, such as SRAM or flash memory. However, the device's internal memory is sufficient for most applications, and using external memory may require additional power and complexity.
The CY8C5248LTI-030 can be programmed using Cypress Semiconductor's PSoC Creator Integrated Design Environment (IDE) or the PSoC Programmer software. The device can also be programmed using a third-party IDE or programming tool, but this may require additional setup and configuration.
CY8C5248LTI-030 datasheet
by Cypress Semiconductor
Findchips
