Texas Instruments recommends a 2-layer PCB with a solid ground plane on the bottom layer and a thermal relief pattern around the device to ensure optimal thermal performance.
To ensure reliable operation at high temperatures, it's essential to follow the recommended thermal design guidelines, use a heat sink if necessary, and ensure proper airflow around the device.
The maximum allowed voltage on the input pins is 6V, exceeding which can cause damage to the device. It's recommended to use voltage limiting resistors or clamping diodes to protect the input pins.
To troubleshoot issues with the device not turning on, check the input voltage, ensure proper connections, and verify that the enable pin is properly configured. Also, check for any short circuits or damage to the device.
The DCP011515DBP-U/700 is a commercial-grade device, and its use in high-reliability or safety-critical applications may require additional testing, validation, and certification. It's recommended to consult with Texas Instruments or a qualified reliability engineer to determine the device's suitability for such applications.
DCP011515DBP-U/700 datasheet
by Texas Instruments
Findchips
