The recommended PCB footprint for the DG301BDJ-E3 is a rectangular pad with a size of 2.5 mm x 1.5 mm, with a 0.5 mm radius corner and a 0.3 mm spacing between pads.
To handle the DG301BDJ-E3's ESD sensitivity, follow standard ESD precautions such as using an ESD wrist strap, ESD mat, and ESD-safe packaging. Also, avoid touching the component's pins or body, and use an anti-static bag or tube for storage.
The maximum allowable voltage for the DG301BDJ-E3's control pins is 5.5 V, which is the maximum rating for the logic input voltage. Exceeding this voltage may cause damage to the device.
The DG301BDJ-E3 is rated for operation up to 125°C. However, it's essential to consider the device's power dissipation and thermal management when operating in high-temperature environments. Ensure that the device is properly heat-sinked and follow the recommended thermal design guidelines.
To ensure the DG301BDJ-E3's analog switches are properly turned on and off, use a logic signal with a rise and fall time of less than 10 ns, and ensure the control voltage is within the recommended range (1.8 V to 5.5 V). Also, avoid applying a voltage to the control pins during power-up or power-down.
DG301BDJ-E3 datasheet
by Vishay Siliconix
