The recommended operating voltage range for the DG406CWI+T is 1.8V to 5.5V.
To properly power down the DG406CWI+T, ensure that the VCC pin is connected to a voltage source, and the SHDN pin is pulled low. This will put the device in shutdown mode, minimizing power consumption.
The maximum frequency of the clock signal that can be applied to the DG406CWI+T is 100MHz.
The DG406CWI+T can be configured for analog or digital output by setting the appropriate bits in the control register. For analog output, set the AOUT bit to 1, and for digital output, set the DOUT bit to 1.
The typical propagation delay of the DG406CWI+T is 10ns.
DG406CWI+T datasheet
by Maxim Integrated Products
