The recommended layout and routing for the DS1693 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the DS1693 and the battery. Additionally, it's recommended to use a 10nF capacitor between the VCC and GND pins to filter out noise.
The DS1693 does not require calibration. It is a self-contained battery monitor that provides accurate measurements of battery voltage, current, and temperature without the need for external calibration.
The DS1693 has a typical accuracy of ±1% for voltage measurements, ±2% for current measurements, and ±2°C for temperature measurements. However, these values can vary depending on the specific application and operating conditions.
The DS1693 is rated for operation up to 85°C, but it can be used in high-temperature applications with some limitations. However, the accuracy of the measurements may degrade at higher temperatures, and the device's reliability may be affected.
The DS1693 communicates with a microcontroller through a 2-wire I²C interface. The device has a 7-bit address, and the microcontroller can read data from the DS1693 by sending the appropriate commands and addresses.
DS1693 datasheet
by Maxim Integrated Products
